The Coco dress pattern turned out so much better while using a heavier ponte knit than the really drapey ponte that i used the last time. I liked the fabric however it most certainly was the wrong choice - that being said I have had a lot of wear out of it!
Another change which I made during the construction of this dress was to include a seam on the Centre back. As the pattern stands, you cut both front and back on the fold. In this case in an effort to minimise the fabric used and to try and squeeze in a skirt from the scraps I cut the back piece on the straight grain not on the fold adding 5/8 inch to the seam allowance on each side. I think this worked well. Using 60 " wide fabric I managed to get the front and rear pieces next to each other on the same width of the fabric. I never redrew the pattern piece though with the seam allowance in so I'll add this in to my pattern now that I know it works so well and saves a ton of fabric.
In making up this dress I realised that in actual fact when making any subsequent versions that i will have to shorten the back length as the back kept wrinkling due to the fact the waist as I had sewn it wanted to sit higher than it hit on the garment. I couldn't tell from the last version that this would be an issue.
In terms of the fabric used for this project, I used a flocked ponte knit - it came in about £7 /m from Remnent Kings. I was told at the time 'do not machine wash or teh flocking will come off' I totally failed to take heed, washed it anyway and this was the result. Hence my coc was constructed using the wrong side of the fabric as the outside. However I care not. I got a nice dress out of it :-)
|This is what happens when you don't listen to washing instructions|
Have a good weekend guys - I'm off to a friends for pre christmas drinks :-D. What is anyone else up to?